Ruger 77/50 209 Conversion Kit

During wet weather, No. 11 caps don't always provide enough fire to consistently ignite the powder charge, especially if you are using pellets. The Ruger 77/50 209 Conversion Kit gives you the ability to fire those hotter 209 primers, virtually eliminating misfires and delayed ignitions.  Click graphic above to access owner's manual.

This kit converts your Ruger 77/50 to allow the use of 209 shotgun primers.

At last, those hard to find Ruger 77/50 209 Conversion Kits are here.  These Ruger 77/50 209 replacement Conversion Kits will also allow you to use the new Variflame Primer Adapters; which are much cleaner than 209 primers and improve your accuracy. Never have the uncertainty of a misfire with a #11 cap! You won't believe the difference. Before, you heard that typical pop then bang of your muzzleloader, but not after switching to a Ruger 77/50 209 replacement nipple.  

If you wanted to use 209 primers and the new Blackhorn 209 powder, this is your chance.

The Ruger 77/50 209 breach plug be taken out and cleaned using our #1 Cleaner.  Convert your Ruger 77/50 209 muzzleloader to fire 209s or the  Variflame Primer Adapters.  This will provide more consistent performance and reduce delays between the cap flash and powder ignition.

The kit contains:

• Firing pin
• 209 nipple
• De-priming tool
• Bolt tool

You will also need a 7/16 socket and extension and the tool provided with your Ruger arm.  Complete installation instructions come with the kit.  As always, when working on your Ruger arm, be certain you rifle is unloaded to prevent injury to person or property.