|
Thompson Center (TC) Encore Locker Pin $41.95
..the only permanent solution to the T/C Encore pin movement problem
The problem: Pin movement side to side and rotation Most everyone who shoots
the Encore has experienced pin movement at some time or another. If the pin moves side to side or rotates, the point of impact will shift
and accuracy will be effected. Cecil's most extreme example was when his pin had slid
all the way to the side of the fore-end causing his .22-250 barrel to shoot
12" right.
The solution: The Locker-Pin Machined from hardened 4140
Chrome Moly The
Locker-Pin is the ultimate solution. Simply slide the pin in place and screw the
locker side with the supplied Allen wrench. No rotation; no left and right; no
change of impact. Hundreds of shots and so far, zero movement.
Fitting of the fore-end: To achieve the
best accuracy from your Encore, the fore-end must not rub on the side of the frame. In other
words, the ears of the fore-end that are designed to keep the factory T/C pin in
place must be filed, ground or sanded so they are not contacting the Metal (side of the
frame). Personally, I grind the inside of the fore-end ears until they clear the
The Locker-Pin by the thickness of a match book cover or a business card. This
allows plenty of free space so the fore-end does not put pressure on the
barrel by contacting the side of the frame. Questions, call toll free 1
877-662-7468.
Price $ 41.95
Encore Locker-Pin Hardened 4140 Chrome Moly
| 